SAVIO Splitter HDMI 4K CL-93

Model: CL-93 EAN: 5901986041764
Check where to buy
You can find our products at a good price on

Splitter HDMI 4K CL-93-allows to split a signal from one HDMI source simultaneously into two HDMI monitors or projectors.

  • HDMI version – 1.4b
  • Signal without quality loss
  • It can be used as an HDMI signal booster
  • Supports Full HD, Full 3D, 4K
  • Supports up to HDMI 3840 x 2160/30 Hz
  • Supports – Deep Color 30bit, 36bit
  • Support for Blu-Ray 24/50 / 60fs / HD-DVD
  • Supported audio formats: DTS-HD / Dolby TrueHD / DTS / Dolby-AC3 / DSD / HD (HBR)
  • LED work signaling
  • If the power supply is insufficient, you can also connect additional external power
  • 24 months warranty
Expand the description
Collapse description

Specification

Purpose
Image
Sound
Color
Black
Backward compatible
Not compatible with HDCP 2.2
Deep Color
Deep Color: 36 bit
Additional information
Audio format support: DTS-HD/Dolby TrueHD/DTS/Dolby-AC3/DSD/HD(HBR)
HDCP-compliant version: 1.2
HDMI version: 1.4
HDMI-compatible splitter for 2 monitors: 3840X2160 @ 30HZ, 1920X1080 @ 60HZ, 1280X720 @ 60HZ, 3D 1280X720 @ 60HZ
Support: 24/50/60fs/HD-DVD/XVYCC
View full specification
See the quick specification

FAQ

  • A minimum of 2 sources must be connected (switched on) for the SWITCH to function correctly
  • Devices connected to the SWITCH must be switched on for the SWITCH to work correctly
  • The CL-28 has the possibility of external power supply from a USB port or a power supply unit (5V, 1A plug size: 3.94×1.2 mm)
  • the SWITCH is protected against copying of the image (HDCP), the signal from a decoder or similar devices may not be transmitted
  • Switch off Bluetooth on the transmitting devices.
  • Press and hold the multifunction buttons located on both headphones for approximately 2 seconds to switch them on.
  • Press the multifunction button on one of the headphones twice to disconnect them from each other. At this point, the LEDs on the headphones light up alternately in blue and red.
  • Press the multifunction buttons on the left handset twice to indicate it as the primary handset. The handsets should pair with each other automatically. The notification light on the left handset will begin to illuminate alternately in blue and red, while the backlight on the right handset will turn off.
  • The headphones are correctly paired and ready for use.

Search

Where you can find our products?

See the entire list Where you can find our products?